Max dagsljus för billigast pris

Till Bauhaus i Sisjön används hela 2900m2 KLARVALV dagsljusinsläpp!

Ljusgenomsläpp genom KLARVALV takljuslanterniner ger en mycket trivsam inomhusmiljö. Med KLARVALV sänker man energikostnaderna – ett bra miljöalternativ!

KLARVALV takljuslanterniner är lämpliga för användning där stora och långa ljusinsläpp önskas. KLARVALV finns i många olika storlekar och former och går även att fås med integrerad brandgasventilation.

Sarg
Galvaniserad plåtsarg som isoleras med takets isolering vid montage, finns som standard i höjderna 300 och 500 mm. Andra höjder går att få efter förfrågan. Plåtsargen kan fås lackad i valfri RAL- kulör. Kan även fås med oisolerad trä-sarg 45 mm tjock och 230 mm hög, kan även tillverkas i önskad höjd.

Befintlig sarg
Om befintlig sarg vid renovering är i bra skick, så har vi även ett fästelement för montering på befintlig sarg. Sedan monteras lanterninens profiler + kanalplast i detta fästelement.

Överdel
Takljuslanterninen tillverkas i 1- till 5-skikts kanalskivor av okrossbar polykarbonat i klart eller opaliserat utförande. Kanalskivornas skikttjocklek finns i 10, 16, 20 och 25 mm.

Storlekar
Bredd: minsta 1,2 – max 6,0 meter.
Längd: inga begränsningar.

Tillbehör
Elektriskt öppningssystem med elmotorer för komfortventilation.
Elektriskt öppningssystem med elmotorer för brandventilation.
Fabriksmålade aluminiumprofiler i valfri färg.
Finns också som pyramidlanternin.

Dokumentation
  • KlarValv Continuous Roof Lights - BIM Objekt

    Öppna länk
  • KlarValv Continuous Roof Lights KlarValv Continuous Roof Lights

    KlarValv is perfect when there is a need of much daylight for a low cost. As standard they are Arch-shaped , but can also be produced as Triangluar-shaped or Pyramid-shaped. They can be produced in a width from 1200mm up to 6000mm. And in length it is no limits! And the top material is of multi-walled Polycarbonate , in thickness between 10mm - 25mm. We can also sell with an extra insulation "10+16mm" or even "16+16mm". But for these the minimum width is 1500mm. You can get these roof lights with integreated Vents ! Either for smoke ventilation or for comfort ventilation (or both). Theses Roof lights are approved according to EN 14963. We produce steel base in heights between 200mm - 700mm. This base comes without insulation , these bases are to be insulated at site during mounting. We also produce an "overlay" type of base for mounting on existing bases , when this is wanted.

    Öppna länk
  • KlarVent Smoke Vents KlarVent Smoke Vents

    KlarVent is needed to let dangerous smoke out from buildings ,people can get out safely and firemen can go into buildings during fires. KlarVent B1010 has an internal size of base on 1000x1000mm , there is 3 different bases as standard , 300 or 500mm high. We also have our very popular "renovation-base" it´s 300mm high and is ready just to place on top of the old base to replace old vent. KlarVent is approved and tested according to EN 12101-2. CE certified. You can get KlarVent in 3 different kinds of lids. 1 with insulated covered aluminium lid , and then 2 different versions with daylight lids ,multi-walled polycarbonate and then also with roof domes as lid. Klarvent has 2 kinds of opening systems , firstly with gas-spring , fusible link that opens at 73 deg celcius and with an electric magnet attached to the lock , so it can be opened from the door entrance or where pushbutton is placed. This system requires that you close the vent by hand from the roof. The second opening system and this is with an electric motor ,with this motor you can both open and close the vent from the control button , no need to get up on the roof to close it , can also be used for comfort ventilation. And we have all needed control units and batteri backups for both systems in our product range. The base we can produce up to 700mm high. Find more info on our website www.nytec.se

    Öppna länk
  • KlarVent Smoke Vents KlarVent Smoke Vents

    KlarVent is needed to let dangerous smoke out from buildings ,people can get out safely and firemen can go into buildings during fires. KlarVent B1212 has an internal size of base on 1200x1200mm , there is 3 different bases as standard , 300 or 500mm high. We also have our very popular "renovation-base" it´s 300mm high and is ready just to place on top of the old base to replace old vent. KlarVent is approved and tested according to EN 12101-2. CE certified. You can get KlarVent in 3 different kinds of lids. 1 with insulated covered aluminium lid , and then 2 different versions with daylight lids ,multi-walled polycarbonate and then also with roof domes as lid. Klarvent has 2 kinds of opening systems , firstly with gas-spring , fusible link that opens at 73 deg celcius and with an electric magnet attached to the lock , so it can be opened from the door entrance or where pushbutton is placed. This system requires that you close the vent by hand from the roof. The second opening system and this is with an electric motor ,with this motor you can both open and close the vent from the control button , no need to get up on the roof to close it , can also be used for comfort ventilation. And we have all needed control units and batteri backups for both systems in our product range. The base we can produce up to 700mm high. Find more info on our website www.nytec.se

    Öppna länk
  • KlarVent Smoke Vents KlarVent Smoke Vents

    KlarVent is needed to let dangerous smoke out from buildings ,people can get out safely and firemen can go into buildings during fires. KlarVent B1020 has an internal size of base on 1000x2000mm , there is 3 different bases as standard , 300 or 500mm high. We also have our very popular "renovation-base" it´s 300mm high and is ready just to place on top of the old base to replace old vent. KlarVent is approved and tested according to EN 12101-2. CE certified. You can get KlarVent in 3 different kinds of lids. 1 with insulated covered aluminium lid , and then 2 different versions with daylight lids ,multi-walled polycarbonate and then also with roof domes as lid. Klarvent has 2 kinds of opening systems , firstly with gas-spring , fusible link that opens at 73 deg celcius and with an electric magnet attached to the lock , so it can be opened from the door entrance or where pushbutton is placed. This system requires that you close the vent by hand from the roof. The second opening system and this is with an electric motor ,with this motor you can both open and close the vent from the control button , no need to get up on the roof to close it , can also be used for comfort ventilation. And we have all needed control units and batteri backups for both systems in our product range. The base we can produce up to 700mm high. Find more info on our website www.nytec.se

    Öppna länk
  • KlarVent Smoke Vents KlarVent Smoke Vents

    KlarVent is needed to let dangerous smoke out from buildings ,people can get out safely and firemen can go into buildings during fires. KlarVent B1218 has an internal size of base on 1200x1800mm , there is 3 different bases as standard , 300 or 500mm high. We also have our very popular "renovation-base" it´s 300mm high and is ready just to place on top of the old base to replace old vent. KlarVent is approved and tested according to EN 12101-2. CE certified. You can get KlarVent in 3 different kinds of lids. 1 with insulated covered aluminium lid , and then 2 different versions with daylight lids ,multi-walled polycarbonate and then also with roof domes as lid. Klarvent has 2 kinds of opening systems , firstly with gas-spring , fusible link that opens at 73 deg celcius and with an electric magnet attached to the lock , so it can be opened from the door entrance or where pushbutton is placed. This system requires that you close the vent by hand from the roof. The second opening system and this is with an electric motor ,with this motor you can both open and close the vent from the control button , no need to get up on the roof to close it , can also be used for comfort ventilation. And we have all needed control units and batteri backups for both systems in our product range. The base we can produce up to 700mm high. Find more info on our website www.nytec.se

    Öppna länk
  • KlarVent Smoke Vents KlarVent Smoke Vents

    KlarVent is needed to let dangerous smoke out from buildings ,people can get out safely and firemen can go into buildings during fires. KlarVent B1224 has an internal size of base on 1200x2400mm , there is 3 different bases as standard , 300 or 500mm high. We also have our very popular "renovation-base" it´s 300mm high and is ready just to place on top of the old base to replace old vent. KlarVent is approved and tested according to EN 12101-2. CE certified. You can get KlarVent in 3 different kinds of lids. 1 with insulated covered aluminium lid , and then 2 different versions with daylight lids ,multi-walled polycarbonate and then also with roof domes as lid. Klarvent has 2 kinds of opening systems , firstly with gas-spring , fusible link that opens at 73 deg celcius and with an electric magnet attached to the lock , so it can be opened from the door entrance or where pushbutton is placed. This system requires that you close the vent by hand from the roof. The second opening system and this is with an electric motor ,with this motor you can both open and close the vent from the control button , no need to get up on the roof to close it , can also be used for comfort ventilation. And we have all needed control units and batteri backups for both systems in our product range. The base we can produce up to 700mm high. Find more info on our website www.nytec.se

    Öppna länk